To access the components and parts of the power plant during maintenance and repair, you need to remove the decorative casing and mudguard
The location of the bolts for fastening the decorative casing in Figure 1
Using a 14 wrench, unscrew the two bolts securing the decorative engine cover to the cylinder head cover
Remove the cover
Install the cover in reverse order
Removing and installing engine mudguard
The engine mudguard is located in the engine compartment from below, protects the engine compartment from contamination and is not a power crankcase protection
To protect the crankcase, as well as all components and assemblies located in the engine compartment, from damage by stones flying out from under the wheels, a plastic or steel shield can be installed on the car upon request
They remove the engine mudguard in case of damage or to provide access to the components and assemblies from the bottom of the car during repairs and maintenance
Location of engine mudguard screws
Location of engine mudguard mounts
Use a Phillips screwdriver to unscrew the screws securing the engine mudguard
We take out the mudguard mounting holders and remove the engine mudguard
Install the engine mudguard in reverse order
