Removing the fuel pump module

Disconnect the wires from the battery terminals, starting with the negative terminal

Raise the rear seat cushion

The hydraulic block or hydraulic distributor, receiving signals from the electronic control unit, switches channels in the control valve block and controls the clutch engagement pressure

The car is equipped with ABS BOSCH 8.0

Depending on the vehicle equipment level, the BOSCH 8.0 system includes only ABS brakes or ABS combined with a trajectory stabilization system (CCT)

To remove the lining of the floor tunnel, you will need a TORX T20 key, screwdrivers, side cutters.

Disconnect the negative battery terminal

There are two models of the headlight range control unit:

• - with a dimmer for the "basic" instrument lighting

We replace the valve stem seals when repairing the cylinder head, as well as when the caps are worn out