Checking the parking-neutral position switch for automatic transmission
Apply the parking brake and turn the ignition key to the ON position
Remove the right lower engine cover
Remove the drain plug with gasket and drain the transmission fluid
The need to replace or repair the clutch slave cylinder is the leakage of working fluid from it
We remove the clutch discs for inspection, repair or replacement
Inspect the one-way clutch
Install special tool 09350-32014 into the inner race of the one-way clutch
Drain the coolant from the cylinder block and radiator
The "Toyota Super Long Life Coolant" used in the Toyota vehicle is filled at the factory
We remove the mufflers, exhaust pipe and suspension pads for replacement, as well as when removing units that require the removal of elements of the exhaust system
Installing the intake camshaft of the front head of the block Installing the intake camshaft of the front head of the engine block 1AZ-FE
Apply a coat of engine oil to the end thrust surfaces of the camshaft
Lightly press the side repeater housing and slide it in the direction shown in figure 1
