We remove the seats for repair and for access to other parts of the car
Removing and installing the front seat
Disconnect the negative battery terminal
Move the seat all the way back
Remove the decorative lining of the sled
We unscrew the two front bolts securing the guide rail to the base of the body
Move the seat all the way forward
Remove the decorative lining of the sled and unscrew the two rear bolts securing the guide sled to the base of the body
We move the seat forward, disconnect the wire blocks and remove the seat from the car
Install the seat in reverse order
Before installation, apply an anaerobic threadlocker to the bolt threads
To remove or install the headrest, you need to press the lock and move the headrest up or down
Removing and installing the rear seat
Rear seat cushion is one-piece and removable
The rear seat back is in two parts and can be removed in parts
Having lifted the front part of the rear seat cushion, we remove the two brackets of its fastening on the right and left of the holes on the body
Remove the rear seat cushion from the car
Flip forward the left side of the rear seatback
To do this, open the trunk lid.
From the luggage compartment, pull the handle of the left backrest latch drive cable and fold the backrest forward
In the same way we recline the right back
Pull the upholstery of the side back up
We unscrew the left and right mounting bolts and remove the left seatback
We unscrew the bolts securing the side backrest bracket to the floor panel and remove the backrest
To remove the right side of the rear seat back, fold it forward
We unscrew the two mounting bolts I swivel bracket to the base of the body and remove it from the car
Install the rear seat in reverse order
