The oil pump is removed for replacement or repair when the pressure in the lubrication system drops below the permissible level, when the gears are noisy and the pressure reducing valve plunger is stuck

The electronic unit, processing the data received from the sensors of the system, controls the operation of two ignition coils, applying low voltage pulses to them

Page 5 of 6

The intermediate shaft drives the oil pump In addition, camshafts are driven through it

A non-contact ignition system of the DLI type is installed on cars, which provides an increase in...

The ZMZ-4062 engine does not have the usual idle system, like in a carburetor. The function of the...

Installation of injection pump, injectors, high and low pressure pipes D-245

The vehicle must be parked on a flat, level surface.

The head of the block can be removed with the receiver and exhaust manifold