Select your language
The gaps between the rocker arms and valves are adjusted on a cold engine, with the cylinder head fastening nuts and the nuts fastening the racks of the rocker arm axles are tightened to the required torque
The car uses DC electrical equipment with a rated voltage of 12 V
Page 2 of 6
During the operation of the engine, some malfunctions may occur: - engine does not start;
We remove the tips of the spark plugs along with the high-voltage wires, the ignition coils (you...
The intermediate shaft drives the oil pump In addition, camshafts are driven through it
The head of the block can be removed with the intake pipe and exhaust manifold
The ignition distributor with a built-in Hall sensor produces voltage pulses, which the switch...
A non-contact ignition system of the DLI type is installed on cars, which provides an increase in...